產品列表
PROUCTS LIST
相關文章
ARTICLE
產品中心Products 當前位置:首頁 > 產品中心 > 污水處理設備 >
-
酸洗磷化廢水處理設備
酸洗磷化廢水處理設備獨立運行時,首先關閉溶氣水控制閥及溶氣水出水控制閥,將加氣選擇開關旋到自動位置,接通電源,啟動工作泵,然后打開溶氣水控制閥。壓力表的壓力逐漸上升,一直達到泵所能達到的壓力(壓力表的壓力達到3~5Kg/cm2),此時可打開溶氣水溶氣水出水控制閥。溶氣水通過溶氣釋放器進入氣浮池,池水中出現大量微氣泡使清水變乳白色,即可認定溶氣系統正常。
更新時間:2023-07-27 產品廠地:濰坊市廠商性質:生產廠家 訪問次數:5406查看詳細介紹 -
小區生活廢水處理設備 地埋式污水處理設備
小區生活廢水處理設備裝置是以生物接觸氧化法工藝為核心技術的一種高效污水凈化處理設備,它可以埋入地下,省掉地面建筑政府規劃審批、設計建造、保溫等復雜環節。同時,具有出水水質好,運行穩定,管理簡便,噪音低等特點。
更新時間:2023-10-02 產品廠地:濰坊市廠商性質:生產廠家 訪問次數:2176查看詳細介紹 -
焦化廢水處理設備工藝
焦化廢水處理設備工藝 :設備的調試: A、清除池中所有的雜物,以免引起堵塞。 B、對水泵、空氣壓縮機及刮沫機構應檢查是否靈活,并按規定加好潤滑油。如有異常應給予排除。 C、接通電源啟動水泵,檢查其轉向是否正確,如反轉,將其中的兩根電線調換相位即可。 D、在手動位置啟動空氣壓縮機(進氣電磁閥),檢查其運行是否正常。發現異常應及時排除。 E、按刮沫機啟動按鈕,刮沫機應向溶氣系統端行走。
更新時間:2023-07-10 產品廠地:濰坊市廠商性質:生產廠家 訪問次數:2710查看詳細介紹